|
PEPS（一键启动）系统技术方案
收藏
汽车或摩托车无钥匙进入功能 1、感应式自动开关门锁，当车主走近距车1.5-2米范围时，门锁会自动打开并解除防盗。 当车主离 开车辆2.5-3米时，门锁会自动锁上并进入防盗状态。 如果离开时车门没关好，车辆会发出提示报警声。 2、当识别车主身份后，车主只需轻轻按下启动按键，车辆即可启动。 当车主在有效范围内按遥控启动键可以实现遥控启动，提前预冷预热车辆。
无匙进入 感应式自动开关门锁，当车主走近距车1.5-2米范围时，门锁会自动打开并解除防盗。 当车主离开车辆2.5-3米时，门锁会自动锁上并进入防盗状态。 如果离开时车门没关好，车辆会发出提示报警声。
---- NCF29A1 方案的电动车PKE方案---- The NCF29A1 / NCF29A2 is an extremely compact single chip solution, ideally suited for automotive applications with combined vehicle immobilization and keyless entry / start functions. The device incorporates a Security Transponder, UHF Transmitter and RISC Controller on the same chip and requires only a few external components. The device transponder operation is compatible with NXP’s Security Transponder families. The NCF29A1 supports 3D LF transponder operation and the NCF29A2 supports 1D LF transponder operation. The security transponder circuitry does not require any battery supply and full operation is guaranteed in case of a battery low condition The RISC Controller is powered by NXP's low power hardware extended (MUL/DIV) 16-Bit MICRO RISC KERNEL (MRK IIIe) employing a 2- stage pipeline architecture in order to improve performance. The device features 10 I/O ports allowing for up to 10 command button inputs. For transponder, keyless entry and go operations, the on-chip hardware Calculation Unit or any user-defined software based algorithm can be employed for data communication. Furthermore, code hopping synchronization for Remote Keyless Entry may be accomplished via the contactless LF interface.
出货中 汽车或摩托车无钥匙进入功能 1、感应式自动开关门锁，当车主走近距车1.5-2米范围时，门锁会自动打开并解除防盗。 当车主离 开车辆2.5-3米时，门锁会自动锁上并进入防盗状态。 如果离开时车门没关好，车辆会发出提示报警声。 2、当识别车主身份后，车主只需轻轻按下启动按键，车辆即可启动。 当车主在有效范围内按遥控启动键可以实现遥控启动，提前预冷预热车辆。
无匙进入 感应式自动开关门锁，当车主走近距车1.5-2米范围时，门锁会自动打开并解除防盗。 当车主离开车辆2.5-3米时，门锁会自动锁上并进入防盗状态。 如果离开时车门没关好，车辆会发出提示报警声。
---- NCF29A1 方案的电动车PKE方案---- The NCF29A1 / NCF29A2 is an extremely compact single chip solution, ideally suited for automotive applications with combined vehicle immobilization and keyless entry / start functions. The device incorporates a Security Transponder, UHF Transmitter and RISC Controller on the same chip and requires only a few external components. The device transponder operation is compatible with NXP’s Security Transponder families. The NCF29A1 supports 3D LF transponder operation and the NCF29A2 supports 1D LF transponder operation. The security transponder circuitry does not require any battery supply and full operation is guaranteed in case of a battery low condition The RISC Controller is powered by NXP's low power hardware extended (MUL/DIV) 16-Bit MICRO RISC KERNEL (MRK IIIe) employing a 2- stage pipeline architecture in order to improve performance. The device features 10 I/O ports allowing for up to 10 command button inputs. For transponder, keyless entry and go operations, the on-chip hardware Calculation Unit or any user-defined software based algorithm can be employed for data communication. Furthermore, code hopping synchronization for Remote Keyless Entry may be accomplished via the contactless LF interface.
出货中 |
